Sanyo PCS VISION RL-4920 - Manual (Page 100)

Assigning Speed Dial Numbers
With this feature you can dial Contacts Directory entries with one
key press for locations 2-9. Save your memory locations 2-9 for speed
dialing your most commonly used phone numbers. Speed Dial
numbers must be stored in your Contacts to use this feature.
To assign Speed Dial:
1. Press to access the main menu.
2. Select Contacts and press .
3. Select Speed Dial #s and press .
4. To select a corresponding speed dial number from 2-9,
highlight an unassigned number and press
.
5. Select an entry from the list and press .
6. Select the phone number you want to set as a speed dial and
press
.
– or –
1. Press the navigation key right.
2. Highlight your desired entry by scrolling through the Contacts
list and press
.
3. Highlight the phone number you want to set as a speed dial and
press Options (right softkey).
4. Highlight Set Speed Dial and press .
5. Highlight an unassigned number and press .
Ⅲ When you highlight an assigned number and press ,
you’ll be asked whether you want to overwrite the assigned
number. Select Yes to overwrite or No to cancel.
To cancel a stored speed dial number:
1. Press to access the main menu.
2. Select Contacts and press .
3. Select Speed Dial #s and press .
4. Highlight the stored speed dial number you want to cancel and
press
.
5. Highlight Unassign and press .
To use Speed Dial:
ᮣ From standby mode, just press and hold the appropriate key.
Section 2G: Using the Contacts Directory 88