Sanyo DSR-5716P - Manual (Page 86)

RECORD SET 2
English
85
z When “AREA FULL RESET” is performed for
“RECORDING AREA”, the recordings in the recording area
are overwritten.
z When “AREA FULL RESET” is performed for “ARCHIVE
AREA”, the recordings in the archive area are deleted.
Use the following procedure to set whether to overwrite the
old video with the new one or stop recording when the hard
disk recording area becomes full. In the latter case, the
remaining capacity is shown as a percentage on the operation
display. A setting can also be made so that the FULL indicator
flashes when the remaining capacity falls to a specific
percentage.
Also set to copy images to the archive area manually (JP.53)
or automatically copy only alarm recordings.
Example: The recording areas and archive area are set so
as not to perform overwriting.
1
Press the [MENU] button.
The MENU indicator lights up and the
2
Turn the jog dial to select “2.RECORD
SET” and then turn the shuttle dial
clockwise.
The screen is displayed.
3
Turn the jog dial to select
“3.RECORDING CONDITIONS SET” and
then turn the shuttle dial clockwise.
The screen is displayed.
4
Turn the shuttle dial clockwise.
“ON” flashes for “OVERWRITE” under “RECORDING AREA”.
5
Turn the jog dial to select “ON” or
“OFF” and then turn the shuttle dial
clockwise.
The cursor moves to “MODE” in “ARCHIVE AREA”.
[Settings] (‹ indicates default setting)
6
Turn the shuttle dial clockwise.
“MANUAL COPY” flashes.
Setting recording conditions
MENU
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1%
AUTO DELETE : OFF
Setting Description
OFF
Recording is stopped when the normal
recording area becomes full.
‹ ON
Overwriting automatically starts from the
beginning of the recording area when it
becomes full.
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1%
AUTO DELETE : OFF
RECORDING AREA
OVERWRITE : ON
ARCHIVE AREA
MODE : MANUAL COPY
REMAINING DISK WARNING : 1%
AUTO DELETE : OFF