Sanyo DSR-5716P - Manual (Page 150)

ADVANCED MENU SET 8
English
149
Use the following procedure to receive notification by e-mail
when an alarm event occurs while the digital video recorder is
connected to a network. Alarm notification cannot be set from
the digital video recorder.
Set this on a PC connected to the network. (JP.207)
The following section describes how to display the alarm
notification setting details.
z When alarm notification settings are performed on a
computer connected to the network, unavailable
characters are displayed as “*” on the digital video
recorder.
1
Press the [MENU] button.
The MENU indicator lights up and the
2
Turn the jog dial to select
“8.ADVANCED MENU SET” and then
turn the shuttle dial clockwise.
The screen is displayed.
3
Turn the jog dial to select “2.ALARM
NOTICE SET” and then turn the shuttle
dial clockwise.
The screen is displayed.
(1) ALARM NOTICE
Displays whether or not an alarm notification is sent.
(2) SMTP SERVER ADDRESS
Displays the SMTP server address.
(3) USER MAIL ADDRESS
Displays the e-mail address from which the alarm notification
is sent.
(4) SEND MAIL ADDRESS SET
Displays the screen.
(J step 4)
(5) SUBJECT
Displays the e-mail subject.
(6) AUTHENTICATION
Displays whether or not user authentication is performed.
(7) POP3 SERVER ADDRESS
Displays the POP3 server address.
(8) USER ID
Displays the user ID.
(9) PASSWORD
Displays the password.
4
Turn the shuttle dial clockwise.
The screen is displayed.
(1) USE
Displays whether or not an alarm notification is sent to the
recipient e-mail address.
(2) MAIL ADDRESS
Displays the e-mail address to which the alarm notification is
sent.
(3) IMAGE
Displays whether or not an alarm image is attached to the e-
mail.
5
Press the [EXIT/OSD] button.
The normal display is restored.
Setting alarm notification
MENU
ALARM NOTICE : OFF
SMTP SERVER ADDRES :
USER MAIL ADDRES :
SEND MAIL ADDRESS SET ->
SUBJECT :
AUTHENTICATION : NO USE
POP3 SERVER ADDRESS :
USER ID :
PASSWORD :
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
USE MAIL ADDRESS IMAGE
1: OFF OFF
2: OFF OFF
3: OFF OFF
4: OFF OFF
5: OFF OFF
6: OFF OFF
7: OFF OFF
8: OFF OFF
(3) (1) (2)
EXIT/OSD