Sanyo DSR-5716P - Manual (Page 80)

RECORD SET 2
English
79
13
Turn the jog dial to select “ON” or
“OFF” and then turn the shuttle dial
clockwise.
Example: ON
[Settings] (‹ indicates default setting)
(For the recording rates that do not support audio recording,
“--” is displayed.)
z Audio recording can only be specified when the recording
rate is 1 FPS or greater.
z When set to “ON”, the letter “A” (indicating that audio is
recorded) is displayed in front of the recording rate. As
both video and audio is stored in the recording area, the
recording capacity decreases.
14
Turn the shuttle dial counter-clockwise.
The screen is displayed.
15
Turn the jog dial to select “YES” and
then turn the shuttle dial clockwise.
The display returns to the
screen.
16
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
z The recording rate is automatically calculated based on
recording settings and the number of connected cameras,
and this is indicated by “REC RATE”. All cameras record at
this rate. If a valid figure cannot be calculated, “ERROR!” is
displayed.
z When easy setup settings and individual settings are both
set, the most recent settings override previous settings.
z Easy setup settings cannot be used with program
recording or day-specific timer recording.
1
Press the [MENU] button.
The MENU indicator lights up and the
2
Turn the jog dial to select “2.RECORD
SET” and then turn the shuttle dial
clockwise.
The screen is displayed.
3
Turn the jog dial to select “1.NORMAL
REC EASY SETUP” and then turn the
shuttle dial clockwise.
The screen is displayed.
Setting Description
‹ OFF Audio is not recorded.
ON Audio is recorded.
RECORDING DURATION : 1 DAYS
TIMER RECORDING(DLY) : ON
START 08:00 STOP 20:00
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
NUMBER OF CAMERAS : 2
REC RATE : A60.000FPS/CAM
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
RECORDING DURATION BASE ->
REC RATE BASE ->
CAUTION !
CONNECT CAMERA AND SET TIME
BEFORE SETUP
Setting based on recording rate
EXIT/OSD
MENU
RECORDING DURATION BASE ->
REC RATE BASE ->
CAUTION !
CONNECT CAMERA AND SET TIME
BEFORE SETUP