Smeg SCP111-1 - Manual (Page 13)

53
Instructions for the user
7.7.2 Automatic cooking
Automatic cooking is the function which allows a cooking operation to be started at
a set time and then ended after a specific length of time set by the user.
Select a cooking function, set the cooking temperature required or leave
the preset temperature (see paragraph “7.6 Selecting a function”) and
press PT1 twice. The display will show the figures and the
symbol (flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59).
For safety reasons, when setting automatic cooking the user must first
program a cooking duration and then set the cooking start time. It is not
possible to set the cooking start time only, without setting the cooking
duration.
After setting the duration, press PT1 once.
The symbol and the current time will appear on the display.
Turning PT1 to the right increases the time, allowing the cooking start
time required to be set.
A few seconds after the required duration is set, the and symbols
will stop flashing, and the oven will start to wait for the starting time set. At
the end, the word STOP will appear on DSP1, cooking will stop and a
buzzer will sound; press PT1 once to deactivate it.