Sharp AR-C265P - Manual (Page 295)

Sharp AR-C265P User’s Guide
295
Macintosh OS 9.x
For more information, see “General Information” on page
292.
1. Open the file you want to print.
2. Click File → Print.
3. In Output Tray, select File.
4. In the PostScript Settings panel, make your choices for
this print job.
Type: specify the PostScript type.
PostScript Level: this must match the PostScript level of
your printer.
Format: select ASCII or Binary. If you select Binary,
make sure that binary data transfer is supported.
Font Data: specify downloading fonts to the file. If you
are only using PostScript fonts, select None.
5. At Name, enter the desired filename.
6. Specify where you want the file saved (location).
7. Click Save.