Sharp AR-C265P - Manual (Page 101)

Sharp AR-C265P User’s Guide
101
Print Menu
Notes:
Factory default settings are shown in bold.
Settings with a dagger (†) only appear when the
appropriate option is installed.
Item Settings Explanation
COPIES 1 to 999 Enter the number of copies of a
document to be printed.
DUPLEX † ON
OFF Enables or disables duplex printing. †
PAPER FEED TRAY1
TRAY2†
MP TRAY Selects the default tray for paper feed.
AUTO TRAY
SWITCH ON
OFF If two trays contain identical print
media, the printer can switch to an
alternate tray when the current tray
runs out in the middle of a print job.
TRAY
SEQUENCE DOWN
UP
PAPER FEED TRAY Sets the sequence in which the printer
will seek an alternate tray with the
same media size should the currently
selected tray run out of media while
printing a job.
MP TRAY
USAGE DO NOT USE
WHEN MISMATCHXXX If a document to be printed demands a
paper size not installed in the selected
tray, the printer can automatically feed
from the Multi-Purpose Tray instead. If
this function is not enabled, the printer
will stop and request that the correct
size be loaded.
MEDIA
CHECK ENABLE
DISABLE Set to DISABLE if you do not wish the
printer to check to see if the size paper
loaded in the selected tray matches that
required for the document being
printed.
MONO-
PRINT
SPEED AUTO SPEED
COLOR SPEED Sets the print engine speed.
If you are printing only color
documents, switch to COLOR SPEED.
AUTO SPEED sets the speed of printing
based on whether the first page is color
or monochrome.