Usb problems, Cannot configure for usb connection – Sharp AR-C265P User Manual

Page 154

Sharp AR-C265P User’s Guide

154

USB Problems _____________________

Cannot configure for USB connection

NOTE

Windows NT 4.0 does not support USB. Windows

98 upgraded from Windows 95 may not support

USB.

Possible cause

Remedy

USB cable does not meet
specifications.

Use USB cable to specification Ver.2.0.

Interface is disabled.

Check that USB interface is set to Enable in
the menu (USB MENU → USB → ENABLE).

Configuration procedure
was not correctly
followed or cancelled.

Configure again from the beginning.

USB cable is
disconnected or faulty.

Reconnect or try another cable.

A USB hub is being used. The printer cannot be used with a USB hub.

Connect the printer and computer directly.

The USB cable is
installed in the Ethernet
port.

Make sure the USB cable is plugged into the
black USB port (1) on the printer:

c52_usb_2_crop.jpg