Sharp AR-C265P - Manual (Page 270)

Sharp AR-C265P User’s Guide
270
Windows PostScript: Single Job
For more information,
Paper Types: see page 265
Paper Weights: see page 265
Paper Sizes: see page 266
Long Edge vs. Short Edge: see page 266
Duplexing Restrictions: see page 267
To change the settings for only one print job:
1. Open the file you want to print.
2. Click File → Print.
3. Select your printer.
4. Click Properties (or Setup, or your application’s
equivalent).
5. Next:
Windows XP: Click the Layout tab.
Windows 2000: Go to the next step.
Windows Me/98: Click the Setup tab.
Windows NT: Click the Advanced tab. Under Document
Options, Layout, go to the next step.
6. Next:
Windows XP, 2000: Click Print on Both Sides
Windows Me/98/NT: 2-Sided Printing.
7. Select
Windows XP, 2000: Flip on Long Edge or Flip on Short
Edge.
Windows Me/98/NT: Long Edge Binding or Short Edge
Binding.
See “Long Edge vs. Short Edge” on page 266.
8. Change any other settings as desired.
9. Click OK.