SanDisk e200 - Manual (Page 9)

Sansa_e200_UserManual.doc 8
Hold Switch (factory set to locked position)
The Sansa e200 Hold Switch is located on the top of the device, and is used
to prevent any accidental operation. All function keys will be disabled once
the Hold Switch is moved to the lock position (Orange Color visible). All the
buttons on the Sansa e200 will not operate when the
Hold Switch is active
(Orange Color visible).
The following message will appear on the display screen if any buttons on the
Sansa e200 is pressed while the unit is in the Locked position. The music
should continue to play even if the device is locked.
Minimum System Requirements
• Windows XP SP1
• Windows Media Player 10+
• Intel Pentium class PC or higher with a CD-ROM drive
• USB 2.0 port required for hi-speed transfer
Firmware Upgrade
SanDisk occasionally releases firmware updates, which includes bug fixes and
performance enhancements. To make sure your Sansa e200 series player
has the latest firmware, please visit
http://www.sandisk.com/e200series/fwupgrade and follow the instructions.
Please execute the following steps to install Sansa Updater utility. If Sansa
Updater is already installed in your computer, skip to the Sansa Firmware
Updater Installation session.
Sansa Updater Software Installation procedure:
1) Download the Sansa Firmware Updater from SanDisk website.
( http://www.sandisk.com/Retail/Default.aspx?CatID=1376 )
2) Click Download Sansa Firmware Updater.
3) Follow the onscreen instructions.
Sansa Firmware Update Procedure: