SanDisk e200 - Manual (Page 6)

Sansa_e200_UserManual.doc 5
Getting Started
Device Overview
1) Record Voice Record Button
2) Strap Eyelet Lanyard connection
3) MIC Internal Microphone
4) Hold/ Lock Factory set to locked position (shows Orange
Color). Slide to unlock controls. When locked all
controls are disabled. Lock to prevent accidental
activation of controls
5) Earphone Port Connect earphones here to listen to player.
6) Display Window Read status and information here.
7) Thumbwheel Rotate to select menu item or adjust volume
8) Select Button Press to select the item
9) Up/Pause/Resume Press to move up one item, pause, or resume
10) Left/Previous/Rewind Press for previous track, rewind, or move left
11) Down/Submenu
Press to move down or to options menu.
12) Right/Forward Press for next track, fast forward, or move right.
13) Power/Menu/ Reset Press to power on/off, enter menu, or hold 15
seconds to reset your Sansa. When the player is
locked using the HOLD switch, described above,
the player will not power on or off. All controls
will be disabled.
14) Dock Connector Port Plug the Dock Connector Cable here.
15) microSD Card Slot
Insert microSD, or gruvi™ content cards.