Samsung SP-H800 - Manual (Page 54)

54
Setting the LED
You can enable or disable the operating LED's on the product.
Setup
Setting the LED
1
MENU
2, 3, 4
2, 3, 4
…/†
5
EXIT
Press the MENU button.
The main menu is displayed.
1
Press the
▲ or ▼ button to move to Setup, then
press the button.
The Setup menu is displayed.
2
Press the EXIT button to exit the settings.
5
Press the
▲ or ▼ button to move to LED, then
press the button.
The LED options will be displayed.
3
Press the
▲ or ▼ button to move to On, then
press the button.
Setup is switched to the selected mode.
4
Setup
… More
Information
√
LED : On √
Move Enter Return
Setup
… More
Information
√
LED : On √
Move Enter Return
Off This mode disables the operating LED.
However, the light will light up regardless of
the LED setting when the power is turned on
or off or when the projector is in an abnormal
state.
On This mode enables the operating LED so that it
can display the current operating state of the
projector.
LED Operating Modes
Off
On