Samsung SP-H800 - Manual (Page 26)

Connections and Source Setup
Setting up the External Input Source
26
Press the MENU button.
The main menu is displayed.
1
Press the desired source button (COMP.1/
COMP.2/ S-VIDEO/COMPOSITE/ PC/DVI).
Pressing a button switches to the respective mode.
You can not switch to the mode if the projector is not
connected to the respective device.
One Touch
1
MENU
2, 3, 4
4
…/†
5
EXIT
Setting up the External Input Source
You can select a device connected to the projector to display.
Press the button to select Input.
The Input menu is displayed.
2
Press the button to select Source List.
The Source List menu is displayed.
3
Press the
▲ or ▼ button to move to desired input
mode, then press the button.
The source input you chose is displayed.
If the input mode is not selected, check that cables are in place.
4
Press the EXIT button to exit the settings.
5
Input
Source List : Component1 √
Edit Name √
Move Enter Return
Source List
Component1 : - - - -
Component2 : - - - -
S-Video : - - - -
Composite : - - - -
PC : - - - -
DVI : - - - -
Move Enter Return
Component1