Sirius Satellite Radio TWILIGHT ISP2000 - Manual (Page 40)

40
display screen that denotes antenna
signal strength . You can also press
menu and then press
to scroll to
and highlight Signal Indicator . Press
the Select button . The Satellite and
Terrestrial bars show the strength of
the signal being received . If the
signal reception is good, press and
hold menu to return to the main
display screen .
7 Ensure onyX is tuned to channel 1 .
Upon power up, onyX should tune to channel 1 by default, when it’s not
yet activated . If it’s not on channel 1, refer to “Listening to Satellite
Radio” on page 55 to learn about how to tune a channel .
8 Turn on your vehicle’s stereo system . Set it to play input from the
auxiliary input source .
9 You should hear XM channel 1 through your vehicle’s stereo system . You
are now ready to activate your onyX .
10 The audio level output of the onyX can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle .
Refer to “Set Audio Level” on page 89 .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i .e ., auxiliary input
source (step 8) . Also be sure that the audio level is set high enough to be heard
(step 10) . Refer to “Troubleshooting” on page 102 for additional help .
Signal Indicator
SATELLITE
TERRESTRIAL
Vehicle Installation