Samsung Eternity II SGH-A597 User Manual

Page 152

147

The following options display:

• Alarm Name: allows you to use a specific name for the alarm. The

name will appear on the display when the alarm activates.

• Alarm Time: use either the Up/Down input arrows or scroll through

the available fields to set the new time for the event, at which time
an alarm will sound. Touch Set to save the new values.

Note: To change the time format, see “Time & Date” on page 56.

• Alarm Repeat: use this option to set the repeating status for the

alarm by placing a checkmark alongside those days you would like
to use for the current alarm. Everyday places a checkmark
alongside all days.

• Snooze: use this option to set a Snooze Duration (5, 10, 15, 20, or

30 Minutes) and a Snooze Repeat (1, 2, 3, 5, or 10 Times).

• Set Details: allows you modify some additional features:

–

Alarm Type sets the way in which the alarm sounds when activated
(Melody, Vibration, Vibration then Melody, and Vibration & Melody).

–

Alarm Tone sets the sound file which is played when the alarm is
activated.

–

Alarm Volume adjusts the alarm’s volume (1 - 7).

Touch Save to store the alarm details and Save again store

this new event.

Touch On from the Auto Power-up field to keep the alarm

event active even if the phone is turned off. Activating this

feature turns the phone on and sounds the alarm even if

the phone was previously is a powered-off state.

Turning Off an Alarm

To stop the alarm when it rings, perform one of these steps:

ᮣ

Locate the Stop slider on the screen and slide it across to the

right until the alarms stops.

– or –

Press any key, such as: volume,

, etc.

– or –

If the phone is facing upwards, flip the phone over so that

it is facing down to mute the alarm. If the phone is facing

downward, flip the phone over and then flip it over again

so that it is facing downward.

To set up your phone to utilize Motion Detection, see

– or –

This manual is related to the following products: