beautypg.com

Specifications – Sharp SRT-8040 User Manual

Page 53

background image

SPECIFICATIONS

General Specifications

Video head system

Dual-azimuth 4-head rotating helical scanning system:
Dual azimuth 2-head for record and standard playback
Dual azimuth 4-head for forward picture search, reverse picture search
and still mode

Audio recording

In 8-, 24- and 40-hour modes (when using T-160 tape)
In 6-, 18- and 30-hour modes (when using T-120 tape)

Tape speed

11.12 mm /sec (8-hour mode)

Specified video cassette tape

VHS 1/2 inch video cassette tape

Recording/playback time (SRT-8960 only) 8, 24, 40, 64, 96, 128, 160, 224, 320, 480, 640, 960 and 1280 hours (when

using T-160 tape)
6, 18, 30, 48, 72, 96, 120, 168, 240, 360, 480, 720 and 960 hours (when
using T-120 tape)

Recording/playback time (SRT-8168 only) 8, 24, 40, 64, 96, 128, 160 and 224 hours (when using T-160 tape)

6, 18, 30, 48, 72, 96, 120 and 168 hours (when using T-120 tape)

Recording/playback time (SRT-8040 only) 8, 24 and 40 hours (when using T-160 tape)

6, 18 and 30 hours (when using T-120 tape)

Fast forward/rewind time

approximately 2 minutes 35 seconds (when using T-160 tape)
approximately 2 minutes (when using T-120 tape)

Television system

NTSC color TV system

Video

Recording method

Luminance signal: FM recording
Chrominance signal: Down-converted direct recording

Video input

1 V(p-p), BNC, 75

, unbalanced

Video output

1 V(p-p), BNC, 75

, unbalanced

Horizontal resolution

Black & white mode

350 line or more

Color mode

300 line or more

Audio

Input

–8 dBs, RCA pin jack, 27 k

, unbalanced

Output

–8 dBs, RCA pin jack, 600

, unbalanced

Connectors

Alarm (1 shot) input

No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)

Control input

Key code (pulse signal) (Normally 5 V)

Series input

No voltage, make-contact switch input (Low input 1s or more, Normally 5 V)

Ext timer (alarm reset) input

No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)

Common

0 V (GND)

Warning output

Open collector Max. 500 mA (Active Low 0 V, Normally open)

Control output

Key code (pulse signal) (Normally 5 V)

Tape end output

Open collector Max. 50 mA (Active Low 0 V, Normally open)

Timer output

DC 5 V, 5.7k

, (Low output)

Switch output

Pulse signal (Normally 5 V)

Remote control input

3.5 mm mini jack

RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002

52

English

This manual is related to the following products: