Sharp SRT-8040 - Manual (Page 28)

PROGRAM TIMER RECORDING
There are three program timer recording methods, daily
recording, weekly recording or recording on certain days
of the week.
Example 1: To record on every Saturday from 9:00
AM to 5:00 PM (17:00), in 24-hour
mode (recording speed).
œ Follow the Before starting steps, under “NORMAL
RECORDING”.
1 Press the MENU button to display the MAIN MENU.
2 Turn the JOG dial to select the “7.TIMER SET” line,
then turn the SHUTTLE ring clockwise.
œ The (TIMER SET) menu appears.
WEEK@@START@@STOP@@SPD
SUN@@@--:--@--:--@@---@N
MON@@@--:--@--:--@@---@N
TUE@@@--:--@--:--@@---@N
WED@@@--:--@--:--@@---@N
THU@@@--:--@--:--@@---@N
FRI@@@--:--@--:--@@---@N
SAT@@@--:--@--:--@@---@N
DAILY@--:--@--:--@@---@N
EXT@@@*****@*****@@---@N
3 Turn the JOG dial until the “SAT” (Saturday) line is
highlighted, then turn the SHUTTLE ring clockwise.
4 Turn the JOG dial to change the weekday, then turn
the SHUTTLE ring clockwise.
ø If no change, turn the SHUTTLE ring clockwise.
ø The recording start hour position starts flashing.
NOTE:
œ All of the lines other than the bottom line can be
set to “SUN”, “MON”, “TUE”, “WED”, “THU”,
“FRI”, “SAT”, “DAILY”, “MO-SA” (Monday to
Saturday) or “MO-FR” (Monday to Friday).
5 Turn the JOG dial to set the recording start hour (ex:
09), then turn the SHUTTLE ring clockwise.
ø The recording start minutes position starts
flashing.
6 Turn the JOG dial to set the recording start minutes
(ex: 00), then turn the SHUTTLE ring clockwise.
ø The recording stop hour position starts flashing.
7 Turn the JOG dial to set the recording stop hour (ex:
17), then turn the SHUTTLE ring clockwise.
ø The recording stop minutes position starts
flashing.
8 Turn the JOG dial to set the recording stop minutes
(ex: 00), then turn the SHUTTLE ring clockwise.
ø The “SPD” (recording speed) position will start
flashing.
NOTE:
œ If the set stop time is earlier than or the same time
as the set start time, the VCR will consider the
stop time to be the following day, and “T” will be
displayed next to the recording stop time.
9 Turn the JOG dial to select the recording speed
mode (ex: 24), then turn the SHUTTLE ring
clockwise.
ø “N” will start flashing.
F Turn the JOG dial to select the desired program
timer recording mode (Y), then turn the SHUTTLE
ring clockwise.
Y. . . . . . . . . . Recording will take place
N . . . . . . . . . Recording will not take place
WEEK@@START@@STOP@@SPD
SUN@@@--:--@--:--@@---@N
MON@@@--:--@--:--@@---@N
TUE@@@--:--@--:--@@---@N
WED@@@--:--@--:--@@---@N
THU@@@--:--@--:--@@---@N
FRI@@@--:--@--:--@@---@N
SAT@@@09:00@17:00@@@24@Y
DAILY@--:--@--:--@@---@N
EXT@@@*****@*****@@---@N
œ Repeat steps 3 to F to program timer recordings
for other days of the week.
œ If a wrong setting has been entered, turn the
SHUTTLE ring counterclockwise to move to the
setting to be changed, then turn the JOG dial to
enter the correct setting.
G Press the MENU EXIT button.
H Press the TIMER button.
ø The timer recording indicator “ n ” will light on
the digital display. The VCR is now in timer
recording stand-by mode.
NOTE:
œ To modify, cancel or stop timer recording, press the
TIMER button to cancel the timer recording mode.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
English
27