Sharp SRT-8040 - Manual (Page 12)

SETTING THE LANGUAGE AND CLOCK
Language Setting
English, French, Spanish or Portuguese can be selected
by the user.
1 Turn the power on to all devices used.
2 Press the MENU button to display the MAIN MENU.
ø The “1.LANGUAGE/CLOCK SET” line appears
highlighted.
1.LANGUAGE/CLOCK@SET
2.DISPLAY/SW@OUT@SET
3.GENERAL@SET
4.WARNING@OUT/CONTR.SET
5.ALARM/SERIES@REC@SET
6.TAPE@MANAGEMENT
7.TIMER@SET
8.HOLIDAY@SET
9.OTHERS
3 Turn the SHUTTLE ring clockwise.
ø The (LANGUAGE/CLOCK SET) menu appears.
ø “ENGLISH” is highlighted (appears in blue
characters).
*LANGUAGE-LANGUE-IDIOMA
@@@@@@@@@@@@@@@ENGLISH
*CLOCK@SET
@01-01-2002@TUE@00:00:00
*DAYLIGHT@SET@@@@@NO@USE
@@@@@@WEEK@@@MONTH@TIME
@ON@@@1ST-SUN@@04@@02:00
@OFF@@LST-SUN@@10@@02:00
4 Turn the SHUTTLE ring clockwise.
ø The display color for the selected item returns
to the original color and flashes.
5 Turn the JOG dial to select the language of your
choice.
œ To set the next item, turn the SHUTTLE ring
clockwise, then turn the JOG dial to select the
next setting.
6 When finished, press the MENU EXIT button to
return to the monitor screen.
Clock setting
Example: To set the clock to October 15, 2002 at 3:20
PM (15:20).
1 Follow steps 1 to 3 under “Language Setting”.
2 Turn the JOG dial until the “CLOCK SET” setting is
highlighted (appears in blue characters).
3 Turn the SHUTTLE ring clockwise.
ø The month position starts flashing.
4 Turn the JOG dial to set the month (10), then turn
the SHUTTLE ring clockwise.
ø The day of week is set automatically.
5 Turn the JOG dial to set the day (15), then turn the
SHUTTLE ring clockwise.
6 Turn the JOG dial to set the year (2002), then turn
the SHUTTLE ring clockwise.
7 Turn the JOG dial to set the hours (15 for 3 PM),
then turn the SHUTTLE ring clockwise.
ø Unit uses 24hours format.
8 Turn the JOG dial to set the minutes (20), then turn
the SHUTTLE ring clockwise.
*LANGUAGE-LANGUE-IDIOMA
@@@@@@@@@@@@@@@ENGLISH
*CLOCK@SET
@10-15-2002@TUE@15:20:00
*DAYLIGHT@SET@@@@@NO@USE
@@@@@@WEEK@@@MONTH@TIME
@ON@@@1ST-SUN@@04@@02:00
@OFF@@LST-SUN@@10@@02:00
œ If a wrong setting has been entered, turn the
SHUTTLE ring counterclockwise to move to the
setting to be changed, then turn the JOG dial to
enter the correct setting.
9 For accurate clock setting, turn the JOG dial
counterclockwise timed with a time broadcast or
other accurate time signal. This will start the seconds
counting from 00.
œ To set the next item, turn the SHUTTLE ring
clockwise, then turn the JOG dial to select the
next setting.
F Press the MENU EXIT button to return to the monitor
screen.
NOTE:
œ In STOP mode, press and hold the STOP button then
press the TRACKING – button to reset the minutes
and seconds to 00 (to the closest hour). For example,
between 13:30:00 and 14:29:59 the clock is reset to
14:00:00.
RF4QR/NA (SRT-8960 GB) Wed. May, 08/2002
English
11