SUPER MICRO Computer SUPERSERVER 6012P-6 - Manual (Page 48)

5-12
S UPERSERVER 6012P-6 User’s Manual
5-8 Connector Definitions
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF2.
Refer to the table on the right for
pin definitions.
Pin
Number
15
16
Definition
Vcc
Control
PW R_LED Pin Definitions
(JF2)
HDD LED
The HDD (IDE Hard Disk Drive) LED
connection is located on pins 13
and 14 of JF2. Attach the IDE hard
drive LED cable to display disk ac-
tivity. Refer to the table on the
right for pin definitions.
H DD LED Pin
Definitions
(JF2)
Pin
Number
13
14
Definition
Vcc
HD Active
ATX Power Connection
T h e p o w e r s u p p l y c o n n e c t o r
meets the SSI (Superset ATX) 20-
pin specification. Make sure that
the orientation of the connector is
correct. See the table on the right
for pin definitions.
Pins
1 thru 4
5 thru 8
Definition
Ground
+12v
8-Pin +12v Power Supply
Connector (J15)
AT X Pow er Supply 20-pin Connector
Pin N umber Definition
11 +3.3V
12
-12V
13 CO M
14
PS_O N
15 CO M
16 CO M
17 CO M
18 -5V
19 +5V
20 +5V
Pin Number Definition
1 +3.3V
2
+3.3V
3 CO M
4 +5V
5 COM
6 +5V
7 CO M
8 PW -O K
9 5VSB
10 +12V
NMI Button
The non-maskable interrupt button
header is located on pins 19 and
20 of JF2. Refer to the table on
the right for pin definitions.
Pin
Number
19
20
Definition
Ground
Control
NMI Button Pin
Definitions (JF2)
PWR_SEC Connection
In addition to the Primary ATX power
connector (above), the Secondary
12v 8-pin J15 connector must also
be connected to your power supply.
See the table on the right for pin defi-
nitions.