SUPER MICRO Computer SUPERSERVER 6012P-6 - Manual (Page 109)

D-1
Appendix D: System Specifications
Appendix D
System Specifications
Processors
Single or dual Intel ® Xeon TM 512K L2 cache processors of up to 3 GHz
and faster at a front side (system) bus speed of 400 MHz
Note: Please refer to the support section of our web site for a complete listing of
supported processors. (http://www.supermicro.com/TechSupport.htm)
Chipset
Intel E7500 (Plumas) chipset
BIOS
4 Mb Phoenix ® Flash ROM
Memory Capacity
Four 184-pin, 25 degree DIMM sockets supporting up to 8 GB of
registered ECC DDR-200 (PC1600) DDR SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. DDR-266
memory modules are supported but only at 200 MHz. See the memory section in
Chapter 5 for details.
SCSI Controller
Adaptec AIC-7899 for dual channnel, Ultra160 onboard SCSI
SCSI SCA Backplane Controller
QLogic GEM318 controller for SAF-TE compliance
SCSI Drive Bays
Three (3) drive bays to house three (3) standard 1" 80-pin SCA SCSI
drives
Peripheral Drive Bays
One (1) 3.5" slim drive
One (1) slim CD-ROM drive
Three (3) 3.5 x 1" drive bays (for SCSI drives)