User programs – Sharp AR-162S User Manual
Page 39
37
GENERAL INFORMA
TION
USER PROGRAMS
4
Select the desired parameter using the numeric keys.
●
The entered parameter number will blink on the right side of the copy
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
5
Press the START key.
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the
key
and then repeat steps 2 to 5. To exit the user program
mode, press the light (
) key.
●
All the alarm indicators will go out.
User programs
Program name
Parameters
Auto clear time
0
OFF
1
30 sec.
* 2
60 sec.
3
90 sec.
4
120 sec.
5
10 sec.
Preheat mode
0
OFF
1
30 sec.
2
60 sec.
* 3
90 sec.
4
120 sec.
Auto power shut-off timer
* 1
30 min.
2
60 min.
3
90 min.
4
120 min.
5
240 min.
Stream feeding mode
* 0
OFF
1
ON
Auto power shut-off setting
0
OFF
* 1
ON
Factory default settings are indicated with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding
function will be disabled.