beautypg.com

User programs – Sharp AR-162S User Manual

Page 39

background image

37

GENERAL INFORMA

TION

USER PROGRAMS

4

Select the desired parameter using the numeric keys.

The entered parameter number will blink on the right side of the copy
quantity display.

The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.

5

Press the START key.

The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.

6

To continue with other user programs, press the

key

and then repeat steps 2 to 5. To exit the user program
mode, press the light (

) key.

All the alarm indicators will go out.

User programs

Program name

Parameters

Auto clear time

0

OFF

1

30 sec.

* 2

60 sec.

3

90 sec.

4

120 sec.

5

10 sec.

Preheat mode

0

OFF

1

30 sec.

2

60 sec.

* 3

90 sec.

4

120 sec.

Auto power shut-off timer

* 1

30 min.

2

60 min.

3

90 min.

4

120 min.

5

240 min.

Stream feeding mode

* 0

OFF

1

ON

Auto power shut-off setting

0

OFF

* 1

ON

Factory default settings are indicated with an asterisk (*).

If you select “0” (OFF) in a program, the corresponding
function will be disabled.