Setting the user programs, User programs – Sharp AR-162S User Manual
Page 38
36
GENERAL INFORMA
TION
Setting the user programs
1
Press and hold the light (
) key for more than 5
seconds until all the alarm indicators (
,
,
,
,
and
) blink and “– –” appears in the copy quantity
display.
2
Enter a program number using the numeric keys.
●
The selected program number will blink in the copy quantity display.
●
If a mistake is made in steps 2 to 4, press the CLEAR (
) key. The
copier will return to step 2.
●
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
Program name
Program No.
Auto clear time
1
Preheat mode
2
Auto power shut-off timer
3
Stream feeding mode
4
Auto power shut-off setting
5
Auditing mode
10
Account number entry
11
Account number change
12
Account number deletion
13
Number of copies per account
14
Resetting account
15
3
Press the START key.
●
For programs 1 to 5, the entered program number will be steadily lit
on the left side of the copy quantity display and the currently selected
parameter number for the program will blink on the right side.
●
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 38 for setting programs 10
to 15.
USER PROGRAMS
User programs
For operation of these programs after
step 3, see page 38.