Sharp AR-162S - Manual (Page 22)

20
MAKING COPIES
TWO-SIDED COPYING
Two-sided copies can be made on this copier using the bypass tray.
1 Place the first original on the original table and make a
copy.
● The first copy can be made using any of the paper feed stations.
2 Replace the first original with the second original and
close the platen cover.
● Make sure that the first and second originals are oriented in the same
way on the original table.
● When the originals are placed horizontally, make sure that the first and
second originals are oriented in the reverse way on the original table.
3 Turn the first copy over left to right and place it into the
bypass tray.
● Be sure to feed the copies one sheet at a time.
4 Use the TRAY SELECT key to select the bypass tray.
5 Press the START key.
Two-sided copying