Sharp AR-162S - Manual (Page 33)

31
ST
A
TUS
INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“B. Misfeed in the fusing area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
Roller rotating knob
2 Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1 Push gently on both sides of the front cover and open it.
2 Carefully remove the misfed paper. Turn the roller
rotating knob in the direction of the arrow to assist in
removing it.
The fusing unit is hot. Take care in removing paper.
Do not touch the photoconductive drum (green portion)
when removing the misfed paper. Doing so may
damage the drum and cause smudges on copies.
3 Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
● The misfeed ( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B. Misfeed in the fusing area
1 Push gently on both sides of the front cover and open it.