Sharp AR-162S - Manual (Page 37)

35
GENERAL INFORMA
TION
User programs
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or canceled as desired.
List of user programs
This copier has the following user programs.
Program No. Program name Description
1 Auto clear time Sets the auto clear time. The copier returns to the initial settings when
the auto clear time elapses after the last copy is made.
2 Preheat mode Sets the time that elapses before the copier enters the preheat mode after
any operation is made. See page 42.
3 Auto power shut-off Sets the time that elapses before the copier enters the auto power
timer shut-off mode after any operation is made. See page 42.
4 Stream feeding Enables or disables the stream feeding mode when an optional
mode* SPF is installed. See page 55.
5 Auto power shut-off Enables or disables the auto power shut-off mode. See page 42.
setting
10 Auditing mode Enables or disables the auditing mode, which controls access to
copier. See page 13.
11 Account number Registers accounts for auditing mode.
entry
12 Account number Changes account numbers for auditing mode.
change
13 Account number Deletes accounts for auditing mode.
deletion
14 Number of copies Displays the total number of copies made against account numbers.
per account
15 Resetting account Resets all audit accounts or resets any desired individual account.
* This program does not affect the copier functions unless certain optional equipment is installed.