Sharp AR-162S - Manual (Page 24)

22
MAKING COPIES
XY zoom
XY ZOOM
5 Use the PRESET RATIO selector ( , ) keys and zoom
( , ) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6 Press the copy ratio display ( ) key.
● The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
● To verify the copy ratios, press and hold down the copy ratio display
(
) key. The vertical and horizontal ratios will be alternately displayed.
7 Ensure that copy paper of the desired size is installed in
the paper tray.
● If desired, the bypass tray can be selected by pressing the TRAY
SELECT key.
8 Set the number of copies.
9 Press the START key.
● To change the copy ratios again, press a PRESET
RATIO selector (
, ) key or a zoom ( , )
key. Then, perform step 3 and the succeeding
steps.
● To cancel this function, press the XY-ZOOM key
again.