Sonic Blue MVP841 - Manual (Page 26)

26
On Screen Icon Display
Three sets of On Screen Icons are available to inform you
of current operating conditions and allow activation of tem-
porary operating changes for a disc currently being played.
Press the DISPLAY push-button once to access the first set
of On Screen Icons. Press DISPLAY a second and third
time to access the second and third sets of icons. Press
DISPLAY a fourth time to remove the icons from the
screen. If a selection is made with an Icon, the display will
disappear. Certain On Screen Icon operations are accessed
with Remote Control push-buttons, and only the selected
Icon will appear. Refer to figures 25, 27, 28 & 29.
Direct DVD Disc Chapter Selection
The MVP841 front panel display indicates the Disc Chap-
ter currently playing. An On Screen Icon also indicates the
DVD Chapter Number currently being played, with the
ability to select a different Chapter. Refer to figure 27.
1. Press the DISPLAY push-button to access the first
group of DVD On Screen Icons.
2. Press an ARROW push-button to access the second
Icon from the left (C), which indicates the Chapter
Number currently playing.
3. To access a different Chapter, press a Numbered push-
button(s) and then SELECT.
Direct CD Track Selection
Selecting a different track on a CD requires only a Number
push-button to be pressed. A different Track can be selected
during play. In the STOP Mode, select a Track Number and
then Press PLAY to start playing the disc with the selected
track. The CD track number and elapsed time will also ap-
pear on the MVP841 Front Panel Display. Refer to figure
25 and 27.
1. Press a Number push-button for the CD track you wish
to play.
2. To display the track number currently being played,
press DISPLAY to access the first group of On Screen
Icons for CD.
3. The first Icon on the left (T) will indicate the current
track being played and the second Icon will indicate
the elapsed time.
4.To access a track using the On Screen Icon, press a
Numbered push-button(s) to access a different track
and then press SELECT.
Access a Specific Time location on a DVD
You can start a DVD playing at any time in the disc by us-
ing the Elapsed Play Time feature. Refer to figures 25 and
27.
1. Press the DISPLAY
push-button to access the
first group of DVD On
Screen Icons. The third
Icon from the left will
indicate the elapsed time
of the disc as it is play-
ing.
2. Press a Right ARROW
push-button to access the
Elapsed Time Icon. The
elapsed time readings
will disappear to allow a
new time to be entered.
3. Press a Numbered push-
button(s) to enter a time
point and then SELECT.
The DVD will immedi-
ately start playing at the
chosen time in the disc.
CD Disc Play Mode
This feature allows you to
choose which tracks of a CD
that you wish to play. You
can also choose Random
Play of Disc tracks. An On
Screen Display will indicate
the total number of tracks and the specific tracks you have
selected. Refer to figure 30.
Note: The Player must be in STOP Mode to activate the Play
Mode feature.
1. In the STOP mode, press the PLAY MODE push-button
to access the CD/CD-Video On Screen Program Menu.
Figure 25
Figure 27
Figure 28
Figure 29