Sony IPELA NSR-100 - Manual (Page 49)

49
Chapter 3 Basic Operation
• When configuration data is restored, any recording operations that were in
progress automatically stop. If you set a recording schedule, recording restarts
automatically after data is restored. If you were performing manual recording,
you must restart manual recording again after data is restored.
1
Click [System] at the top of the window.
The “System Menu” screen appears.
2
Click [Restore Configuration Data].
The “Restore Configuration Data” screen appears.
3
Select the location of the configuration data and the desired data, and then
click [Restore].
A message appears notifying the user that this operation will require an NSR
reboot.
4
Click [OK].
During restoration, a progress bar appears. When restoration is complete,
the NSR reboots and the configuration data is restored.