Sony IPELA NSR-100 - Manual (Page 27)

27
Chapter 2 Initial Configuring the System
6
Select the [Date and Time], and then click [Select].
The [Date and Time] screen appears.
7
Configure the date and time, and then click [Accept].
Year/Month/Day
Enter the date.
Hour/Min
Enter the correct time, and then select [AM] or [PM].
Time Zone
Select the time zone where you are located.
* There is no option for enabling or disabling summer time. If you select a time
zone in which time is adjusted for summer time, the time is adjusted for summer
time automatically.
When you click [Accept], the [Setup Menu] screen returns.
8
Select the [Network], and then click [Select].
The [Network Device Menu] screen appears.
9
Select the desired network device, and then click [Select].
The network settings consist of a “General Network Setting” and a
“Network Device” that provides LAN ports.
When using the NSR-25, only “Network Device 1” can be set.