SMC Networks SMCWAA-B User Manual
Page 36
35
1. From the main SMCWAA-B Utility window, click the Discover... button.
2. A list of available Wireless Audio Adapters will be displayed in the main
window.
Section 7.6 | Editing or Adding a Network Profile
The Factory Defaults profile for a Wireless Audio Adapter cannot be edited.
However, there are other profiles available that can be edited to effectively
create new profiles. These can be edited at any time, but any existing
information in the selected profile will be overwritten once the profile has been
edited and saved.
1. Display the profile to be edited
2. Give your profile a unique Profile Name.
3. Enter
the
Service Set ID (SSID) for your wireless LAN.
4. If you select the Allow ad-hoc connection checkbox, it means that your
PC will use a direct peer-to-peer connection to the Wireless Audio Adapter
and no Internet connection is available.
5. If you are using WEP encryption on the wireless network, click the WEP
enabled checkbox and enter the appropriate WEP key and the Key
index.
6. If you are using a proxy server, check the Use proxy server checkbox,
enter the Proxy server as an IP address (e.g. 192.167.0.10) or as a
name (e.g. my.proxy). The Proxy port number must be a numeric value
(usually port 80 or 8080).
7. If the Wireless Audio Adapter will get a
dynamic
IP address automatically
from a DHCP server, select the Use DHCP checkbox.
8. If the Wireless Audio Adapter needs a
fixed
IP address, leave the Use
DHCP checkbox unchecked and enter the IP Address
for the Wireless
Audio Adapter, Netmask (Subnet mask), Gateway, Primary DNS and
Secondary DNS. If no DNS or Gateway is required, enter the address
0.0.0.0 for these.
9. Click
the
Apply button to confirm the changes, or click the Refresh button
to discard the changes.
10. To make this the active profile for the Wireless Audio Adapter, click the
Make Active button. (This can also be selected later on the Wireless Audio
Adapter directly using the remote control) Click the Close button to return
to the main window.
11. Click
the
Discover button to verify that the Wireless Audio Adapter can still