SMC Networks SMCWAA-B User Manual
Page 18
17
5 | SMC EZ-Stream™ 11Mbps Wireless Audio Adapter
Setup
The following table describes the various supported network environments. The
wireless network should be installed and running before you attempt to install
the Wireless Audio Adapter.
Network Environment
Description
Wireless, via an Access Point
•
DSL/cable modem
•
Access Point (AP) with wireless card
•
PC with wireless connection to AP
•
Wireless Audio Adapter connects wirelessly to AP
Peer-to-peer (Ad Hoc)
•
No modem or AP
•
PC with wireless card
•
Wireless Audio Adapter connects wirelessly to PC
•
Note: Internet Radio features are not supported in
this environment.
1) Insert the provided batteries into the remote control.
2) Connect the provided RCA audio cable from the SMCWAA-B to your home
audio system or you may use headphones as well.
3) Plug the provided power supply into your wall socket and connect the
power cable to the SMCWAA-B.
4) Wait for the SMCWAA to power up. It will attempt to connect
automatically to your wireless network using its built-in default settings. If
it is not able to connect, the LCD will display a list of available wireless
networks for you to choose from. Scroll down the list and select the
desired WLAN.
5) If encryption is enabled on your wireless network, you will be prompted to
enter a Key. Check that the Key Entry Method and Key Size are
correct and then enter the encryption key for your wireless network. Once
completed, the SMCWAA-B will save the settings and reboot.
6) A welcome screen will be displayed while the SMCWAA-B is connecting to
the network. After a connection has been successfully established, the top
level menu will be displayed. Scroll down, select your Music Server and
choose your audio content (i.e. – genre, artist, album, playlist, song).
Start streaming!