SMC Networks SMCWAA-B User Manual
Page 28
27
asterisk *) will be changed.
6. Press
the
Scroll Up/Down buttons until the desired network setting is
selected. Press the Select button to edit the setting. Note: for settings that
require text input, this triggers Edit Mode.
7. Make the changes required to the setting and press the Select button.
IMPORTANT: When you have finished making changes to Network Setup
settings, you must explicitly save the settings in order for them to take effect. If
you use the Cancel button during this process, all changes will be lost.
8.
Press the Scroll Down button until Save is displayed. Press the Select button to display
“Save Settings?” (or you may also be prompted to press the Store button to save and
exit).9. Press
the
Select button to save the changes (or press the Cancel button to
abandon changes).
10. The Wireless Audio Adapter will then restart and use the new settings.
Available Network Status Settings
Setting
Explanation
Device Name
Name of the Wireless Audio Adapter device.
Example: My SMCWAA-B
Version
Current version of the Wireless Audio Adapter
software in use.
SSID
SSID (Service Set Identifier) assigned to the Wireless
Audio Adapter by your wireless network. The SSID
must contain between 2 and 32 alphanumeric, case-
sensitive characters.
Network Type
Wireless network type. Options:
Infrastructure If the network uses an Internet
Access Point
Ad-Hoc If the network uses a peer-to-peer
connection and no Internet Access Point.
WEP
Indicates whether or not Wired Equivalent Privacy
(WEP) encryption is enabled on the wireless network.
Options:
Disabled (default)
Enabled.
Key Entry Method
Options:
ASCII (default) Key is entered as text (this is not the
same as a passphrase however).