Sharp MD-M3H - Manual (Page 41)

39
TIMER OPERATION
■ Timer playback
Before timer playback, the following preparations
are required.
I
Load a CD, MD.
I
Preset the radio station.
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the MD, CD, TUNER(BAND), AUX button
to select desired function.
3
Press the TIMER button to select the timer play-
back mode.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
PLAY
4
During “
f
PLAY” is flashing, press the ENTER
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
5
Press the or button to set the hour to start,
and then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
6
Press the or button to set the minute to
start, and then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
I
If not set manually, the ending time will automati-
cally be set for one hour after the starting time.
● Before setting the timer, make sure that the
clock setting is correct. (Page 9)
1,10
5,6,7,8
3
2
9
4,5,6,7,8
(Remote control operation)
7
Press the or button to set the hour to stop,
then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
8
Press the or button to set the minute to
stop, then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
PLAY
PLAY
9
Rotate the VOLUME control to adjust the sound
volume.
I
Be careful not to turn the volume up too high.
10
Press the ON/STAND-BY button to enter the
stand-by mode.
I
The timer stand-by indicator will light up.
11
When the timer start time is reached, timer play-
back will start.
12
When the timer end time is reached, timer play-
back will stop.
I
“
f
PLAY” will disappear, and the timer mode will
be cancelled.
The unit will enter the stand-by mode.
Notes:
I
The timer cannot control the component con-
nected to the Auxiliary Input sockets.
I
When the CD or MD is played to the end, play-
back will stop before the stop time.
If you wish to play to the stop time, set repeat
play for the CD or MD.
To change the programmed contents:
Start again from step 1.
To stop playback during timer playback:
Press the ON/STAND-BY button to enter the stand-
by mode.
To confirm the timer setting:
Press the TIMER button once.
I
The turn-on time, the turn-off time and name of
sound source will be displayed.
To cancel timer operation:
1
Whilst in the timer stand-by mode, press the ON/
STAND-BY button to turn the power on.
2
Press the TIMER button repeatedly to turn off
the timer, “
f
PLAY” will go out.