Sharp MD-M3H - Manual (Page 15)

13
06
2 4
5 3
5 3
2 4
06
CONVENIENT CD AND MD OPERATION
■ APSS (Auto Program Search Sys-
tem)
APSS automatically locates the beginning of any
track.
■ Repeat and random play
1
Select the desired programme source, CD or
MD button.
2
Press the P-MODE button.
● Each time this button is pressed, the mode will
change in the following order:
Repeat indicator Random indicator Disappears
3
Press the
0 6
button to start playback.
Repeat play
After the last track has been played, playback will
return to the first track and begin again.
Random play
When the
0 6
button is pressed, all of the tracks
will be played at random, and then playback will
stop. (The same track will not be played back twice.)
To cancel repeat or random play:
Press the P-MODE button until the "
R
" or "RAN-
DOM" display disappears.
To repeat playback of selected tracks:
Enter the programme for the tracks you want and
start repeat play.
You can programme a single track and play it
repeatedly (Refer to page 14).
Notes:
● During APMS play, random play is not possible.
● When random or repeat play is selected during
CD or MD playback, random or repeat play will
start at that point.
● When using repeat play, be sure to press the ■
button after you are through listening. Otherwise,
the disc will play continuously.
To listen again to the track being played:
Press the
5 3
button for less than 0.5 seconds
during playback.
To move to the beginning of the next track:
Press the
2 4
button for less than 0.5 seconds
during playback.
To skip a number of tracks at one time:
Press the
5 3
or
2 4
button repeatedly until
the desired track number is shown.
To start playing at a desired track:
Press the
5 3
or
2 4
button whilst in the
stop mode to select the track number, and then
press the
0 6
button.
■ Cue and review
1
Load a disc and begin playback.
2
Hold the
2 4
button down for audible fast
forward, and hold the
5 3
button down for
audible fast reverse.
3
Normal playback will resume when the
2 4
or
5 3
button is released.
Notes:
● When the beginning of the first track is reached,
normal playback will start.
● When the end of the last track is reached, "END"
will light, and the unit will pause.
If you want to listen to a portion of a track again,
press the
5 3
button to return to the point in
the track you want to listen to. Normal playback
will start from that point.
06
H
P-MODE
MD
CD
(Remote control operation)