Sharp MD-M3H - Manual (Page 36)

34
1
During playback or in the pause mode, press
the NAME/TOC EDIT button.
REC
SLEEP
2
Within 10 seconds, press the ENTER button.
TRACK
REC
SLEEP
TRACK
● The unit will enter the character input mode.
● The track you are listening to will be played
repeatedly.
3
Press the DISPLAY button to select the type of
characters.
4
Select the character you want pressing the
or button.
REC
SLEEP
■ To create a track name
Name each track.
A track’s name will be displayed whenever you
select it and during playback.
NAME/
TOC EDIT
CLEAR
ENTER
DISPLAY
/
(Remote control operation)
5
Press the ENTER button to enter the character.
REC
SLEEP
● Repeat steps 3 to 5 above to enter the charac-
ters in the name. When the next character’s type
is the same as the previous character, step 3
can be skipped.
6
After entering all of the characters in the name,
press the NAME/TOC EDIT button.
REC
SLEEP
● The track name will be recorded.
● The unit will return to normal playback.
● Press the
0 6
button in the pause mode, the
unit woll return to normal playback.
To erase a track name:
After performing steps 1 to 2.
1
Press the CLEAR button for 2 seconds or more.
● “NAME CLEAR” will flash.
2
Press the ENTER button.
Notes:
● Up to 40 characters can be entered.
● This function cannot be used in the random play
mode and APMS play mode.
● If you create a track name whilst recording the
track, make sure you finish entering the name
before you finish recording the track.
If the end of the recording is reached before you
have entered the complete name, only the char-
acters entered before the recording ended will
be recorded.
(Continued)