Communication setup, Settings – Sharp AQUOS BD-HP24U(A) User Manual
Page 44
SETTINGS
Communication Setup
This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions, Netflix and software updates that
connect to the internet.
NOTE
Make sure that the LAN cable is connected to this Player.
(See page 18.)
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
IP address, netmask, gateway, DNS address
This player cannot be connected to a network when a
proxy server is used.
•
•
−
•
Press
SETUP to display the Menu screen.
Press
a/b to select “Settings”, then press d or
ENTER.
Press
a/b to select “Communication Setup”,
then press
d or ENTER.
Press
ENTER, then press
a/b to select
“Change”, and then press
ENTER again.
Current Ethernet setup info.
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
IP Address
Netmask
Gateway
DNS
Change
Initialize
For initializing the current setting, select “Initialize”,
then press ENTER.
1
2
3
4
•
For setting the IP address, press
c/d to select
“Yes” or “No”, then press
ENTER.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes
No
If selecting “Yes”: The IP address is automatically
obtained.
If selecting “No”: The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 43.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select “Next”, then press
ENTER.
If selecting “Yes” in the step 5, go to the step 9.
Enter your DNS address.
Enter your DNS address.
Primary
Secondary
Next
The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 43.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select “Next”, then press
ENTER.
For testing the connection to the internet, after
confirming the settings, press
a/b to select
“Test”, then press
ENTER.
“Test” is available only when setting to obtain the IP
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx
IP Address
Netmask
Gateway
DNS Address
MAC Address
Test
Complete
As a result of the test, if the internet connection fails,
enter the setup values manually.
Press
a/b to select “Complete”, then press
ENTER.
5
•
•
6
•
7
•
8
9
•
•
10
42
BD-HP24UA_en.indd 42
BD-HP24UA_en.indd 42
2010/06/10 17:59:08
2010/06/10 17:59:08