Sharp AQUOS BD-HP24U(A) - Manual (Page 19)

Audio Connections
Connecting to the Digital Audio Terminal or Audio Jacks
You can connect audio equipment or the TV to the DIGITAL AUDIO OUT terminal or 2CH AUDIO output jacks.
For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 48. •
•
This Player
Audio equipment with a digital audio input terminal or audio jacks
STEPS
Be sure to turn off this Player and the equipment before making any connections.
Firmly connect an optical digital cable (commercially available) or AV cable (supplied) to the optical digital audio
terminals or audio jacks (
1 and 2, or 3 and 4).
1
2
After connecting
If necessary, perform the Audio Video Settings. (Pages 39–40)
Prepare the desired disc or content and start playback. (Pages 24–32) •
•
Amplifier
When using OPTICAL output,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI
terminal.
•
TV
To 2CH AUDIO
output jacks
To AUDIO
input jacks
(White)
Optical digital cable
(commercially available)
3
(Red)
(White) (Red)
Red
White
Red White
4
To OPTICAL output
terminal 1
To OPTICAL
input terminal 2
AV cable (supplied)
17
Connection
BD-HP24UA_en.indd 17 BD-HP24UA_en.indd 17 2010/06/10 17:58:33 2010/06/10 17:58:33