Sharp Aquos TINS-E595WJQZ - Manual (Page 65)

63
Enjoying V
ideo and Audio Playback
Buttons under the cover
Audio Setting Display
Pressing BD FUNCTION during playback displays the
playback setting screen.
The current playback audio format and number of channels
are displayed.
BD-VIDEO
00 : 20 : 30
1
1 / 3
5 . 1ch
5 5 / 2
2 English
1
On Title Repeat
1 5 . 1ch
Number of channels 2
Audio format 1
Recording audio number
Audio icon
Audio format
The current playback audio format is displayed.
(LPCM, Dolby Digital, DTS, etc.)
Number of channels
The number of current playback channels is displayed.
(Mono, Stereo, 5.1 channels, etc.)
•
1
2
Various Audio Settings
Changing the audio setting
You can switch between main audio and sub audio for
dual mono input or when playing back a dual mono
disc.
Press AUDIO.
Pressing AUDIO changes the mode as follows.
MAIN
SUB
MAIN/SUB
*
* MAIN/SUB outputs the main audio and sub audio
from different speakers.
Audio delay setting
If the playback image on the TV is not synched with
the audio output from the system when playing back a
Blu-Ray disc or DVD, you can delay the output of the
audio from the system for better synched audio and
video.
Press AUDIO DELAY.
The current mode (setting) is displayed.
By default, AUTO (DL AUTO) is selected.
When the system is connected to future AQUOS
LINK-compatible TV models using an HDMI cable,
you can press
AUDIO DELAY and select DL AUTO to
automatically select the optimal audio delay.
Press a/b within 3 seconds to adjust the delay.
300
(MANUAL)
•
•
•
10
AUTO
OFF
MANUAL setting can be used to manually set the
audio delay from 10 milliseconds to 300 milliseconds
in 10 millisecond increments.
•
1
•
2
•
Audio Settings and Operations