Stamina Products AVARI GX 8 - Manual (Page 7)

STEP 2: Thread the NUTS(3/8"-16)(79) all the way to the bottom of the threaded rod on the STANDS(59).
Lift the front stabilizer on the MAIN FRAME(1) and place a temporary spacer (wood block or thick book)
under the front of the MAIN FRAME(1). Thread the three STANDS(59) into the MAIN FRAME(1). Remove
the temporary spacer.
NOTE:
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: [email protected]
7
ASSEMBLY INSTRUCTIONS
STEP 1: Attach the REAR STABILIZER(2) to the MAIN FRAME(1) with BUTTON HEAD BOLTS
(M10x1.5x25mm)(64), WASHERS(M10)(78), and LOCK WASHERS(M10)(76).
See page 12 for detailed leveling instructions to prevent rocking.
Make the tab face down
for assembly.
Lift from the
Front Stabilizer
It will be easier to attach the PEDAL CAPS(29L, 29R) to the PEDAL ARMS(6, 7) by raising the
PEDAL ARMS(6,7) and then attaching the PEDAL CAPS(29L, 29R). Please have a partner hold
the raised pedal arm as you attach the PEDAL CAPS(29L, 29R). This way you are not lying on the
floor trying to attach the PEDAL CAPS(29L, 29R).
STEP 4: Attach the PEDAL CAP(29L) to the LEFT PEDAL ARM(6) and the PEDAL CAP(29R) to the
RIGHT PEDAL ARM( 7) with SOCKET HEAD BOLTS(M6x1x12mm)(65).
NOTE:
STEP 3: Make the tab in the edge of the OVAL ENDCAPS(58) face down, then press the OVAL ENDCAPS
(58) into both ends of the front stabilizer of the MAIN FRAME(1).
R
L