Maintenance, Storage – Stamina Products AVARI GX 8 User Manual

Page 23

MAINTENANCE

The safety and integrity designed into the

Avari GX8

can only be maintained when the

Avari GX8

regularly examined for damage and wear. Special attention should be given to the following:

Use the " / " buttons on the COMPUTER(20) to select a program and verify that the Generator System
provides different tensions. The Generator System should provide many years of use.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Verify that the Warning Labels are present and legible. Replace the Warning Labels if they are missing or
damaged.
Verify that all nuts, bolts, and knobs are present and properly tightened. Replace missing nuts, bolts, and
knobs. Tighten loose nuts, bolts, and knobs.
Worn or damaged components shall be replaced immediately or the

Avari GX8

removed from service

until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the

Avari GX8

Keep your

Avari GX8

clean by wiping with an absorbent cloth after use.

2.
3.

6.
7.

To store the

Avari GX8

simply keep it in a clean dry place.

The

Avari GX8

is approximately 89 3/8" long x 25 5/8" wide x 64 7/8" tall. These dimensions may vary.

Please measure your

Avari GX8

if exact dimensions are needed.

Move the

Avari GX8

with the moving wheels on the REAR STABILIZER(2). Lift from the Front Stabilizer

of the MAIN FRAME(1) to move the

Avari GX8

. Two people are required.

To avoid damage to the COMPUTER(20), remove the batteries before storing the

Avari GX8

for one

year or more.

1.
2.

STORAGE