SMC Networks 10G - Manual (Page 38)

I
NSTALLING THE
S
WITCH
3-2
Ethernet Cabling
To ensure proper operation when connecting to the management port,
make sure the current cable is suitable for 10BASE-T or 100BASE-TX
operation. Check the following criteria against the current installation of
your network:
• Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP)
cables with RJ-45 connectors; Category 3 or better for 10BASE-T, or
Category 5 or better for 100BASE-TX.
• Protection from radio frequency interference emissions
• Electrical surge suppression
• Separation of electrical wires (switch related or other) and
electromagnetic fields from data based network wiring
• Safe connections with no damaged cables, connectors or shields
Figure 3-1 RJ-45 Connections
RJ-45 Connector