SMC Networks 10G - Manual (Page 28)

A
BOUT THE
T
IGER
S
WITCH
10G
1-8
Features and Benefits
Connectivity
• 8 10GBASE-T XFP slots for 10 Gbps Ethernet connections –
supports 10GBASE-SR and 10GBASE-LR XFP transceivers
• One 100BASE-TX management port
- Auto-negotiation enable the RJ-45 management port to
automatically select the optimum communication mode (half or full
duplex) if this feature is supported by the attached device; otherwise
the port can be configured manually
- RJ-45 port supports auto MDI/MDI-X pinout selection
- Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or
better for 10 Mbps connections, and Category 5 or better for 100
Mbps connections
• IEEE 802.3-2002 Ethernet, Fast Ethernet and 802.3ae 10 Gigabit
Ethernet compliance ensures compatibility with standards-based hubs,
network cards and switches from any vendor
Performance
• Transparent bridging
• Aggregate duplex bandwidth of up to 160 Gbps.
• Switching table with a total of 16K MAC address entries
• Provides wire-speed store-and-forward switching
• Broadcast storm control
• Support for optional Redundant Power Supply