Sony 570WSPL - Manual (Page 45)

Chapter 2 Fitting and Connections
45
Chapter 2 Fitting and Connections
When using equipment other than this
camcorder for power supply
Break off projections A and B on the camcorder. (See
step 1 of the previous section “When using a video
light with a long cable”.) Insert the cable into the grip
from the front hole and take out from the rear hole as
shown in the figure.
Fitting the Shoulder Strap
This section describes the procedure for fitting the
supplied shoulder strap to the camcorder.
g
Pull up the strap to
lock the fiting.
1
Fit one of the clips to a
shoulder strap fitting.
2
Fit the other clip to the
shoulder strap fitting on the
other side of the grip in the
same way.
Clip