Sanyo Xacti VPC-J1EX - Manual (Page 156)

CHECKING THE REMAINING CARD MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 193.
Checking the remaining number of images and video recording time
1
Set the selector dial to [
Õ
], and set
the camera to the desired shooting
mode.
œ The remaining number of images
appears in the upper right of the LCD
monitor (for the still image and
sequential shots shooting modes).
œ The remaining video recording time
appears in the upper right of the LCD
monitor (for the video clip shooting
mode).
œ The remaining number of images and
video recording time will differ
depending on the resolution and
compression settings.
œ When the remaining number of
images or the remaining video
recording time is “0”, you cannot
capture any more images. To capture
more images, either install a new
card, or save the images to a
computer (see page 157) and then
erase them (see page 83) from the
card.
12 12 12
2.8
1/30
Remaining number of images
SX711/EX, GX, U (VPC-J1 GB) Tue. Feb., 25/2003
153
English