Woodstock SHOP FOX W1667 - Manual (Page 12)

Figure 9. Loosely installing table lock lever.
To install the table, do these steps:
1. Thread the table lock handle 3 turns into
the table support bracket.
2. Insert the lock shoe into the pocket locat-
ed inside the hole of the table support
bracket. See
Figure 9.
3. Slide the table support bracket onto the
column until the table support bracket is
near the bottom of the column.
4. Tighten the table lock handle to lock the
table in position.
When installed correctly, the table should
lock in position with firm lever torque.
-10-
Table
ASSEMBLY