Woodstock SHOP FOX W1667 - Manual (Page 10)

-8-
Figure 6. Components laid out for identification.
UNPLUG machine before
any assembly procedures.
Otherwise serious personal
injury may occur! WEAR safety glasses during
all assembly procedures.
Otherwise serious personal
injury may occur!
The following is a list of the components shipped with the W1667 8 1 ⁄
2
'' Oscillating Drill Press.
Inventory the components in a similar fashion as shown in Figure 6, and assembly will be quicker and
easier. If any part is missing, examine the packaging carefully and check under the belt guard. If any
parts are still missing, contact Woodstock International, Inc. at 1-360-734-3482 or tech-support@shop-
fox.biz.
1. Headstock
2. Base
3. Column
4. Table
5. Dust Port
6. Drill Chuck and Key 7. Table Inserts (4)
8. Spindle Handles (3)
9. Cap Screw and Washers
10. Sanding Spindle
11. Hex Head Bolts (3)
12. Hex Wrenches (2) 13. Belt Tension Knob
14. Table Lock Knob
15. Open End Wrench
16. Phillips Head Screws (4)
17. Lock Shoe
ASSEMBLY
Box Contents
ASSEMBLY
Use the parts list at the back of
this manual when ordering parts.