Sony RM-VL1000 User Manual

Page 41

SYSTEM COMPO
SET

SYSTEM

SAT

CABLE

DVD

SYSTEM
SET

SYSTEM

COMPO

Continued

To clear the component macro
of a label

In Step 2 (page 41), while pressing
the Label Select button
corresponding to the label that
you want to erase, press the
SCROLL button. (The labels for
which a series of commands is
programmed stay lit.)
“CLEAR OK” appears and the
component macro is cleared with a
beep sound.
The cleared label flashes together
with other labels for which a series
of commands is not programmed.

Note

When you select the label for which a
series of commands is programmed,
the ‘NG’ sound is heard. If you release
the Label Select button then, data is not
cleared and the component macro
signal is transmitted.

In Step 4 (page 35), select
“COMPO” by pressing the
Label Select button.

Component names are
displayed. The labels for which
a series of commands is
programmed stay lit and others
flash.

Select the component for
which you want to program
a series of commands by
pressing the Label Select
button (for example, DVD).

Program a series of
commands for the
component label by
following the same
procedure of Step 6-8 on
page 36.

Press the SET button.

With a beep sound, a series of
operating commands is
registered.
The display returns to Step 2
above.