Sony RM-VL1000 - Manual (Page 17)

17
Finding a component code
with the Search function
You can find a code number
available for a component that
doesn’t have one in the supplied
“Component Code Numbers.”
Before starting the Search
function
Set each component to the
following status to enable the
Search function.
TV, AMP: Power-on
CD, MD, TAPE, DAT: Power-on
with a playback source (disc,
cassette tape, etc.)
Other components: Power-off
COMPO
SYSTEM
TIMER
SCROLL
SET
REC
VIDEO1 VIDEO2 AUX
TUNER CD TAPE
MD TV
DVD
MENU
MUTING RECALL
VOL CH
GUIDE
PHONO
POWER
1
2
3
5
6
4
When the remote control signal
is sent,
is shown on the
display.
The component should turn
off.
5
If you have succeeded,
check that the Commander
is operating the other
functions of your
component, such as channel
and volume control.
See page 23 for details.
If the Commander does not
seem to be working
Try repeating these setup procedures
using the other codes listed for your
components (see page 13).
Notes on labels on the LCD
display which have “learned” a
remote control signal already
If another signal has already been
programmed on that label by the
learning function (page 23), you
cannot preset the component code
number. To use it as a preset
component label, first erase its
learned signal (page 29).
Continued
TV