Samsung BN68-00951A-00 - Manual (Page 64)

English - 64
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and some Samsung Set-top
boxes (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxs.
1 Turn off your VCR (Cable box or DVD).
2 Press the MODE button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
The remote control has five modes : TV, VCR, CABLE,
DVD and STB.
3 Press the SET button.
4 Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example: To enter code “6”, press 0, 0, and 6.
To enter code “76”, press 0, 7, and 6.
5 Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
6 Once your remote control is set up, press the MODE button any
time you want to use the remote control to operate the VCR
(Cable box or DVD).
➢
◆ When your remote control is in VCR, CABLE, DVD or
STB mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause, and fast
forword) still operate your VCR or DVD.
VCR
BN68-00951A-00Eng 8/3/05 3:07 PM Page 64