Samsung BN68-00951A-00 - Manual (Page 61)

Connecting Home Theater System
English - 61
Connecting the Home Theater System
①
Connect the monitoring audio out L and
R jacks of the AV OUT on the rear-side
connection panel of the PDP TV to the
AUDIO IN jacks of the DVD Home
Theater System (or AV Receiver) using
the audio cable.
②
Press the SOURCE ( ) button to
select the desired external device
connected to the PDP TV.
③
If you want to hear the sound through
separate speakers, cancel the internal
amplifier.
To Display the DVD Home Theater
! Turn the PDP on and press the SOURCE ( ) button to select the AV IN (1, 2) or Component (1, 2).
@ Be sure to connect the video cable properly if desired external input (AV IN (1, 2) or Component (1, 2))
cannot be selected.
# Play the DVD after activating the DVD Home Theater System.
$ Use the volume control of the Home Theater System while watching the PDP using the DVD Home
Theater, where the PDP TV does not produce the audio.
DVD Home Theater
Rear of the TV
AV Receiver Amplifier
① ②
Use the “AV OUT” ports of the PDP for Home Theater System Connections.
☛
◆ Refer to corresponding user’s manual from the manufacturer for wiring the
speakers to the DVD Home Theater System (or AV Receiver).
◆ Disable the PDP TV internal speaker to enjoy the rich sound through the
speakers of your Home Theater System.
➢
Please be sure to match the colour coded input terminals and cable jacks.
BN68-00951A-00Eng 8/3/05 3:07 PM Page 61